Before you install GCC, we encourage you to run the testsuites and to compare your results with results from a similar configuration that have been submitted to the gcc-testresults mailing list. Some of these archived results are linked from the build status lists at https://gcc.gnu.org/buildstat.html, although not everyone who reports a successful build runs the testsuites and submits the results. This step is optional and may require you to download additional software, but it can give you confidence in your new GCC installation or point out problems before you install and start using your new GCC.
First, you must have downloaded the testsuites. These are part of the full distribution, but if you downloaded the “core” compiler plus any front ends, you must download the testsuites separately.
Second, you must have the testing tools installed. This includes DejaGnu, Tcl, and Expect; the DejaGnu site has links to these. Some optional tests also require Python3 and pytest module.
If the directories where runtest
and expect
were
installed are not in the PATH
, you may need to set the following
environment variables appropriately, as in the following example (which
assumes that DejaGnu has been installed under /usr/local):
TCL_LIBRARY = /usr/local/share/tcl8.0 DEJAGNULIBS = /usr/local/share/dejagnu
(On systems such as Cygwin, these paths are required to be actual paths, not mounts or links; presumably this is due to some lack of portability in the DejaGnu code.)
Finally, you can run the testsuite (which may take a long time):
cd objdir; make -k check
This will test various components of GCC, such as compiler front ends and runtime libraries. While running the testsuite, DejaGnu might emit some harmless messages resembling ‘WARNING: Couldn't find the global config file.’ or ‘WARNING: Couldn't find tool init file’ that can be ignored.
If you are testing a cross-compiler, you may want to run the testsuite on a simulator as described at https://gcc.gnu.org/simtest-howto.html.
In order to run sets of tests selectively, there are targets ‘make check-gcc’ and language specific ‘make check-c’, ‘make check-c++’, ‘make check-d’ ‘make check-fortran’, ‘make check-ada’, ‘make check-objc’, ‘make check-obj-c++’, ‘make check-lto’ in the gcc subdirectory of the object directory. You can also just run ‘make check’ in a subdirectory of the object directory.
A more selective way to just run all gcc
execute tests in the
testsuite is to use
make check-gcc RUNTESTFLAGS="execute.exp other-options"
Likewise, in order to run only the g++
“old-deja” tests in
the testsuite with filenames matching ‘9805*’, you would use
make check-g++ RUNTESTFLAGS="old-deja.exp=9805* other-options"
The file-matching expression following filename.exp=
is treated
as a series of whitespace-delimited glob expressions so that multiple patterns
may be passed, although any whitespace must either be escaped or surrounded by
single quotes if multiple expressions are desired. For example,
make check-g++ RUNTESTFLAGS="old-deja.exp=9805*\ virtual2.c other-options" make check-g++ RUNTESTFLAGS="'old-deja.exp=9805* virtual2.c' other-options"
The *.exp files are located in the testsuite directories of the GCC source, the most important ones being compile.exp, execute.exp, dg.exp and old-deja.exp. To get a list of the possible *.exp files, pipe the output of ‘make check’ into a file and look at the ‘Running … .exp’ lines.
You can pass multiple options to the testsuite using the
‘--target_board’ option of DejaGNU, either passed as part of
‘RUNTESTFLAGS’, or directly to runtest
if you prefer to
work outside the makefiles. For example,
make check-g++ RUNTESTFLAGS="--target_board=unix/-O3/-fmerge-constants"
will run the standard g++
testsuites (“unix” is the target name
for a standard native testsuite situation), passing
‘-O3 -fmerge-constants’ to the compiler on every test, i.e.,
slashes separate options.
You can run the testsuites multiple times using combinations of options with a syntax similar to the brace expansion of popular shells:
…"--target_board=arm-sim\{-mhard-float,-msoft-float\}\{-O1,-O2,-O3,\}"
(Note the empty option caused by the trailing comma in the final group.) The following will run each testsuite eight times using the ‘arm-sim’ target, as if you had specified all possible combinations yourself:
--target_board='arm-sim/-mhard-float/-O1 \ arm-sim/-mhard-float/-O2 \ arm-sim/-mhard-float/-O3 \ arm-sim/-mhard-float \ arm-sim/-msoft-float/-O1 \ arm-sim/-msoft-float/-O2 \ arm-sim/-msoft-float/-O3 \ arm-sim/-msoft-float'
They can be combined as many times as you wish, in arbitrary ways. This list:
…"--target_board=unix/-Wextra\{-O3,-fno-strength\}\{-fomit-frame,\}"
will generate four combinations, all involving ‘-Wextra’.
The disadvantage to this method is that the testsuites are run in serial,
which is a waste on multiprocessor systems. For users with GNU Make and
a shell which performs brace expansion, you can run the testsuites in
parallel by having the shell perform the combinations and make
do the parallel runs. Instead of using ‘--target_board’, use a
special makefile target:
make -jN check-testsuite//test-target/option1/option2/…
For example,
make -j3 check-gcc//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
will run three concurrent “make-gcc” testsuites, eventually testing all
ten combinations as described above. Note that this is currently only
supported in the gcc subdirectory. (To see how this works, try
typing echo
before the example given here.)
The result of running the testsuite are various *.sum and *.log files in the testsuite subdirectories. The *.log files contain a detailed log of the compiler invocations and the corresponding results, the *.sum files summarize the results. These summaries contain status codes for all tests:
It is normal for some tests to report unexpected failures. At the current time the testing harness does not allow fine grained control over whether or not a test is expected to fail. This problem should be fixed in future releases.
If you want to report the results to the GCC project, use the contrib/test_summary shell script. Start it in the objdir with
srcdir/contrib/test_summary -p your_commentary.txt \ -m gcc-testresults@gcc.gnu.org |sh
This script uses the Mail
program to send the results, so
make sure it is in your PATH
. The file your_commentary.txt is
prepended to the testsuite summary and should contain any special
remarks you have on your results or your build environment. Please
do not edit the testsuite result block or the subject line, as these
messages may be automatically processed.
Return to the GCC Installation page